PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.
XENOY ? Resin 5720U |
SI | | British | | Metric | Europe-Africa-Middle East: COMMERCIAL |
| Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 470 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 480 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, yld, Type I, 5 mm/min | 440 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 5 mm/min | 500 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, yld, Type I, 10 mm/min | 450 | kgf/cm2 | SABIC - Japan Method | |
| Tensile Stress, brk, Type I, 10 mm/min | 470 | kgf/cm2 | SABIC - Japan Method | |
| Tensile Strain, yld, Type I, 50 mm/min | 4 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 116.6 | % | ASTM D 638 | |
| Tensile Strain, yld, Type I, 5 mm/min | 4.6 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 5 mm/min | 122.4 | % | ASTM D 638 | |
| Tensile Strain, yld, Type I, 10 mm/min | 4.6 | % | SABIC - Japan Method | |
| Tensile Strain, brk, Type I, 10 mm/min | 109.5 | % | SABIC - Japan Method | |
| Tensile Modulus, 50 mm/min | 18500 | kgf/cm2 | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 18600 | kgf/cm2 | ASTM D 638 | |
| Tensile Modulus, 10 mm/min | 18700 | kgf/cm2 | SABIC - Japan Method | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 710 | kgf/cm2 | ASTM D 790 | |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span | 700 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 16900 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, yield, 5 mm/min | 44 | MPa | ISO 527 | |
| Tensile Stress, break, 5 mm/min | 43 | MPa | ISO 527 | |
| Tensile Stress, yield, 50 mm/min | 47 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 43 | MPa | ISO 527 | |
| Tensile Strain, yield, 5 mm/min | 4.1 | % | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 106.8 | % | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 4.6 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 115.3 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 1790 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 71 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 1860 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 73 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, 0°C | 70 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -10°C | 67 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -20°C | 70 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -30°C | 65 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -40°C | 60 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Energy @ peak, 23°C | 456 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact, Energy @ peak, -20°C | 420 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Energy @ peak, -30 | 504 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Energy @ peak, -40°C | 504 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Total Energy, 23°C | 550 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Total Energy, -20°C | 542 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Total Energy, -30°C | 631 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Total Energy, -40°C | 603 | cm-kgf | ASTM D 3763 | |
| Izod Impact, notched 80*10*4 +23°C | 55 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 0°C | 55 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -10°C | 52 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -20°C | 50 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -30°C | 48 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -40°C | 46 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 55 | kJ/m2 | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 47 | kJ/m2 | ISO 179/1eA | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 119 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 108 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 3.2mm, unannealed | 83 | °C | ASTM D 648 | |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 117 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 95 | °C | ASTM D 648 | |
| CTE, -40°C to 95°C, flow | 9.75E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 95°C, xflow | 1.E-04 | 1/°C | ASTM E 831 | |
| CTE, -30°C to 80°C, flow | 9.75E-05 | 1/°C | ISO 11359-2 | |
| CTE, -30°C to 80°C, xflow | 1.E-04 | 1/°C | ISO 11359-2 | |
| Vicat Softening Temp, Rate B/50 | 119 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 122 | °C | ISO 306 | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 109 | °C | ISO 75/Bf | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 87 | °C | ISO 75/Af | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.17 | - | ASTM D 792 | |
| Specific Volume | 0.85 | cm3/g | ASTM D 792 | |
| Density | 1.17 | g/cm3 | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 1 - 1.2 | % | SABIC Method | |
| Melt Flow Rate, 250°C/2.16 kgf | 3.8 | g/10 min | ASTM D 1238 | |
| Melt Flow Rate, 250°C/5.0 kgf | 11.4 | g/10 min | ASTM D 1238 | |
| Melt Flow Rate, 265°C/2.16kgf | 6 | g/10 min | ASTM D 1238 | |
| Melt Flow Rate, 266°C/5.0 kgf | 19.7 | g/10 min | ASTM D 1238 | |
| Density | 1.17 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 0.28 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.08 | % | ISO 62 | |
| Melt Flow Rate, 250°C/2.16 kg | 3 | g/10 min | ISO 1133 | |
| Melt Flow Rate, 250°C/5.0 kg | 11 | g/10 min | ISO 1133 | |
| Melt Volume Rate, MVR at 250°C/2.16 kg | 3 | cm3/10 min | ISO 1133 | |
| Melt Volume Rate, MVR at 250°C/5.0 kg | 10 | cm3/10 min | ISO 1133 | |
| Melt Volume Rate, MVR at 265°C/2.16 kg | 6 | cm3/10 min | ISO 1133 | |
| Melt Volume Rate, MVR at 265°C/5.0 kg | 18 | cm3/10 min | ISO 1133 | |
| Source GMD, last updated:2007/07/31 |
|
Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 110 | °C |
| Drying Time | 4 - 6 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 260 - 275 | °C |
| Nozzle Temperature | 255 - 270 | °C |
| Front - Zone 3 Temperature | 255 - 275 | °C |
| Middle - Zone 2 Temperature | 250 - 270 | °C |
| Rear - Zone 1 Temperature | 245 - 265 | °C |
| Mold Temperature | 65 - 90 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 50 - 80 | rpm |
| Shot to Cylinder Size | 50 - 80 | % |
| Vent Depth | 0.013 - 0.02 | mm |
| Source GMD, last updated:2007/07/31 |
|
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES. |
| Compare | Contact Us | |
| XENOY? Resin | ||
| Grades |
De |
|
| 1102 |
Unreinforced PC/polyester alloy. Excellent low temperatue impact/chemical resistance to automotive fluids. Datasheet Product Data: Auto Data: |
|
| 1760T |
11% GF impact modified PBT+PC blend, excellent flow for doorhandles Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 5220U |
Unreinforced PBT+PC alloy. Improved retention of mechanical properties under UV. Excellent low temperature/chemical reistance. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 5720U |
PBT+PC, UV-Stabilizer, High Impact, Impact Modified, UV-Stabilized, Datasheet Product Data: Auto Data: |
|
| 6370 |
30% Glass filled PBT blend, with low warpage characteristics and good ductility. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| CL100 |
General purpose grade for unpainted exterior automotive applications. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| CL101 |
PBT+PC, Mold Release, Heat Stabilized, High Impact, Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| CL500U |
Good impact and chemical resistance. UV resistent. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| X4820 |
PBT+PC, Mineral Filler + Fibrillated Network, Impact Modified, Opaque, Datasheet Product Data: Auto Data: |
|
| X4830 |
PBT+PC, Mineral, Impact Modified, Datasheet Product Data: Auto Data: |
|
| X4850 |
PBT+PC, Mineral, Impact Modified, Datasheet Product Data: Auto Data: |
|
| X5300WX |
Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability. Datasheet Product Data: Auto Data: |
|
| XL1562 |
Impact modified PBT+PC blend, outstanding chemical resistance, good UV stability and flow properties. Datasheet Product Data: Engineering Design Data Auto Data: |
|
下一篇：
暫無相關信息！
轉載請注明：轉載自環球塑化資訊網 http://www.wdfyjz.com/news/
本文鏈接：http://www.wdfyjz.com/b-shabo/news270046/
免責聲明：本文"XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定."僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868
簡繁切換