點擊圖片查看大圖
| Compare | Contact Us | |
| NORYL GTX? Resin | ||
| Grades |
De |
|
| GTX4610 |
PPE+PA, Glass, Datasheet Product Data: Auto Data: |
|
| GTX673 |
PPE+PA, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX678 |
PPE+PA, Flame Retardant, Conductive, Heat Stabilized, Impact Modified, Nonhalogenated, Datasheet Product Data: Auto Data: |
|
| GTX8730 |
PPE+PA, Glass, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX902D |
NORYL GTX902D is a GTX902E with smaller shaped pellets. Datasheet Product Data: Auto Data: |
|
| GTX975 |
18% mineral filled conductive NORYL GTX. Datasheet Product Data: Auto Data: |
|
| GTX989 |
PPE+PA, Conductive, High Impact, Datasheet Product Data: Auto Data: Auto Specification |
|
| NX0031 |
PPE+PA, conductive with high impact Datasheet Product Data: Auto Data: |
|
NORYL GTX ? Resin GTX989 |
SI | | British | | Metric | Americas: COMMERCIAL |
| NORYL GTX989 is a conductive and high heat material, especially designed for in- and on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity for electro-static painting in an unique way. |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 660 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 610 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 5 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 45 | % | ASTM D 638 | |
| Tensile Modulus, 50 mm/min | 23900 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 960 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 24900 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, yield, 50 mm/min | 60 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 55 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 5 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 40 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2300 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 90 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2300 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 24 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -30°C | 18 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Total Energy, 23°C | 611 | cm-kgf | ASTM D 3763 | |
| Izod Impact, notched 80*10*4 +23°C | 22 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -30°C | 15 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 22 | kJ/m2 | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 15 | kJ/m2 | ISO 179/1eA | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 195 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 190 | °C | ASTM D 648 | |
| CTE, -40°C to 60°C, flow | 8.5E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 60°C, xflow | 8.5E-05 | 1/°C | ASTM E 831 | |
| CTE, 23°C to 60°C, flow | 9.E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 60°C, xflow | 9.E-05 | 1/°C | ISO 11359-2 | |
| Vicat Softening Temp, Rate B/50 | 195 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 200 | °C | ISO 306 | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 190 | °C | ISO 75/Be | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.08 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 1.2 - 1.6 | % | SABIC Method | |
| Melt Flow Rate, 280°C/5.0 kgf | 16 | g/10 min | ASTM D 1238 | |
| Density | 1.08 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 4.2 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 1.2 | % | ISO 62 | |
| Melt Volume Rate, MVR at 280°C/5.0 kg | 19 | cm3/10 min | ISO 1133 | |
| ELECTRICAL | Value | Unit | Standard | |
| Volume Resistivity | 1.E+03 - 1.E+04 | Ohm-cm | SABIC Method | |
| Source GMD, last updated:2014/01/17 |
|
Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 100 - 120 | °C |
| Drying Time | 2 - 3 | hrs |
| Maximum Moisture Content | 0.07 | % |
| Melt Temperature | 290 - 320 | °C |
| Nozzle Temperature | 280 - 310 | °C |
| Front - Zone 3 Temperature | 290 - 320 | °C |
| Middle - Zone 2 Temperature | 280 - 300 | °C |
| Rear - Zone 1 Temperature | 260 - 280 | °C |
| Hopper Temperature | 60 - 80 | °C |
| Mold Temperature | 80 - 120 | °C |
| Source GMD, last updated:2014/01/17 |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換